CP-130 is a two-component water base top coat. With water as dilution, it has no the irritating odor as the solvent base epoxy and it is more environmental friendly. It can be applied in the wet and humid areas and is mainly suitable for the floor of foodstuff, beverage factory, especially the humid ground floor.

CP-31 is a type of two-component water base primer. It can bond the substrate very well even under humid environment and avoid the bubbling problem of the paint film due to the underground moisture.

Advantages:

1. With water as dilution, more environmental friendly

2. No irritating odor, harmless to health

3. Good abrasion resistance and durability

4. High hardness and strong adhesion

5. Resistant to oil and general chemicals.

Where to Use:

For interior concrete floors of parking, warehouses, shopping centers, garages, office,showroom,etc.

Requirements for the base:

1. Concrete strength≥C25; Concrete moisture concten <4%

2. Flatness: the maximum altitude difference＜3mm (measure with 2M running rule)

3. Press polish of the concrete surface with cement mortar is recommended.

4. Water & damp proof treatment is suggested before application of leveling layer of the concrete.

Technical Data:

Drying time:

Touch dry: 6 hours (25℃)

Hard dry: 7days (25℃)

VOC content: <1% (mixture)

Adhesive force grade: 1

Pencil hardness (H): 6

Abrasion resistance(750g/500r, zero gravity, g)≤0.031

Engine oil and diesel oil resistant test: no change after 60 days (fully submerged)

10% sulphuric acid resistant test: no obvious change after 20 days (fully submerged)

20% NaOH resistant test: no obvious change after 30 days (fully submerged)

Shelf life: 6-12 months

Storage:

Seal the can tightly and store in a cool, well-ventilated place. Avoid damp, sunlight exposure and freezing.

-------------------------
For application detailed instructions, Click here please.