Description:

CP-1000 is a two-component epoxy solvent paint. It can be applied in the cold and moist environment, especially in the wet and humid areas. The coating is hard and wear-resistant. Large range of colors for choice and it is mainly used for the floor of light industrial workshop, warehouse, parking lot etc.

Advantages:

1. Beautiful, seamless, dustproof and easy to clean.

2. Strong adhesion, small shrinkage

3. Corrosion-resistance to the general chemicals.

4. Good abrasion resistance and durability.

Requirements on the Concrete Floor:

1. Concrete strength≥C25;

2. Flatness: the maximum altitude difference of 2M running rule＜3mm.

3. The moisture content of the base＜4%

Technical Data:

Drying time:

Touch dry: 8 hours  (25℃)

Hard dry: 2--4 days (25℃)

Compressive strength (Mpa): 80

Impact resistance strength (Kg·cm): 50

Flexural strength (Mpa): 40

Adhesive force grade: ≤1

Pencil hardness (H): ≥2H

Abrasion resistance(750g/1000r, zero gravity, g)≤0.02

Recommended Consumption for Coating Layers:

Primer: 0.15kg/sqm

Undercoat: 0.3kg/sqm

Putty layer: 0.2kg/sqm

Quartz Sand: 0.45kg/square meter

Quartz Powder: 0.2kg/square meter

Top coat: 0.3kg/sqm
Overcoat Varnish: 0.2 kg/sqm

Click for Coating Instruction Details.