Guangdong Crown Paint Company Limited

Non Solvent Epoxy Colored Midcoat

  • main raw material: Epoxy Resin
  • Applied on : Concrete floor, Metal floor
  • Usage: indoor floor coating decoration protection waterproofing
  • Application tool: spatula
  • State: Liquid Coating
  • Thickness: 1~2 mm
  • Service life: over 10 years


CP-M is a kind of Solvent-Free two-Component Epoxy Mid-Coat, mixed with Quartz Sand or Quartz Powder for Mid-Layer, Repairing gaps,holes,joints,etc. It is usually produced in same color as topcoat to help save topcoat consumption,prolong the service life, more convenient for repair and renovation.


1. Super low VOC, excellent leveling property,low shrinking percentage after curing

2. High strength to improve the floor’s strength and flatness,suitable for heavy duty floors.

3.Fast Curing time: 4 hours dry for grinding (25鈩);Recoat after 12 hours;

4.Same color as topcoat. relieve the color difference of floor caused by topcoat’s wearing in daily use;maintain the color stable on the floor in longer time. Only need to refresh the topcoat for renovation.

5. Available for thick coating 1-3mm at one time.

6, Convenient application. Low ratio of thinner can be added to increase the application feeling.

Requirements of the base:

1. Concrete strengthC25; Concrete moisture concten <4%

2. Flatness: the maximum altitude difference of 2M running rule1mm

3. Press polish of the concrete surface with cement mortar is recommended.

4. Water & damp proof treatment is suggested before application of leveling layer of the concrete.

Technical Data:


Technical Data




Packing Size

25 kg

5 kg





0.3~1 kg/m2

Mix Ratio

A:B = 5 : 1 (by weight)

Pot Life




Re-coat Time







 Application Procedure:

1.    Mid-Coat: Prepare a barrel, pour CP-MA and CP-MB in it based on 5:1. Stir the mixture well and then add sand or powder at certain ratio,then stir again for 2-3 minutes, apply it with trowel.The reference consumption is 0.3~1 kg/.The main purpose of Mid-Coat is to improve the heavy-duty performance,smooth floor,etc.. A second coat may be applied depending on the designed thickness of whole coating. The recoat time is about 8~12 hours.

Inspection standard for the primer: Non-sticky to hand; no foot print while walking.

Application conditions: temperature 10 ; Relative humidity < 85%

Previous 锛