One of the most common questions I get with epoxy floors is if it is necessary to prime the floor before applying the epoxy floor coat. Many contractors would like to avoid priming, as priming means at least an extra day of work as well as the additional cost of purchasing the primer products.

Flooring professionals are actually divided over this issue, but let me just say that I belong to the Priming is necessary camp. So in this article I am presenting five great reasons why I always recommend the use of primer.

1. Let’s start with the most obvious: Adhesion. The floor primer penetrates the substrate and enables the bonding of your floor coat to the substrate. The right primer will guarantee better adhesion of your floor coats to the substrate, longer life and the risk of the coat chipping or breaking is significantly reduced

2. Priming will significantly reduce the chances of bubbles emerging in the coat. This is especially common in thicker coats like self leveling where air trapped in the concrete slab can generate gas bubbles and pinholes in the coating. By properly priming and sealing the substrate you are reducing the risk of gas being released. 

3. Priming helps you get a feel for the floor. When you work with old contaminated substrates the floor may have absorbed all sorts of chemicals like oils, paints, greases, moisture etc. By applying a coat of primer you can see how the existing substrate will react to the epoxy. This way you can take precautionary measures before it is too late to act. I was once having a wall prepared for a wall coat only to see it turn red after we applied the primer (true story). Another time we assumed that all the oil had been removed from the surface only to see the oil rise to the surface of the floor.

4. Priming will reduce the chance of the coat being sucked in by the substrate. Sometimes substrates can be very dusty and absorbent. If you try to apply a coat on them you may end up getting an ugly matte look as all the fluids have been absorbed by the substrate. Use primers to seal off the surface before you apply the paint coats. An extra coat of primer may actually save you on consumption of epoxy paint.

5. Finally no matter how well you clean the floor there will always be some micro dust stuck on the surface. Priming is a great way to eliminate this dust, to create a nice well sealed surface, that is ready for the main coating action to take place.